Today we are going to tell you about how to configure wifi connection for iBall Baton 150M Extreme N Router for BSNL DSL modem. Just follow these simple steps written below:
* First of all power off the DSL Modem. Remove power adapter, Ethernet cable and router.
* Now connect the power adapter to the router.
* Remove ethernet cable which connects the DSL Modem to the computer. Insert the Ethernet cable (cable from DSL Modem) to the WAN port of the router.
*Now you have to connect the other Ethernet Cable to the LAN port of your computer. Make sure that your Land line is also connected with the DSL Modem.
*Insert the Power Adapter to router. Power on the router and DSL Modem.
*Now open any browser and type “192.168.1.1” in the address bar and press Enter button.
*You will see two boxes “Username” & “Password”. Write “admin” in both the boxes and hit enter button.
*After Logged in look at the left side and you will see “Quick Configuration”; click next button there.
*Now you have to click wireless client router then again click next button.
*You will find “PPPoE”; select it and click on next button.
*Now fill up the username and password box (BSNL Broadband Office will give you the Username and Password) and hit next.
*Here you have to fill up SSID, BSID (to fill up these click on the Survey).
*If you want to set password for your wifi then simply select “WPA-PSK” and enter your desired password then click Next button.
*You will see a command “Restart Your Router” on your screen. Click on Restart button and wait few seconds and enjoy .